• bbb

Professional China dry type capacitor - New developed Hybrid Supercapacitor Battery – CRE

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for Capacitor For Cell Proliferator , High Quality Film Capacitor , Mkp Capacitor , We welcome new and old clients from all walks of lifestyle to speak to us for potential organization relationships and mutual success!
Professional China dry type capacitor - New developed Hybrid Supercapacitor Battery – CRE Detail:

Application

1. Memory backup

2. Energy storage, mainly used for driving motors require a short time operation,

3. Power, higher power demand for a long time operation,

4. Instantaneous power, for applications that requires relatively high current units or peak currents ranging up to several hundreds of amperes even with a short operating time

Electrical performance and safety performance

No

Item

Test method

Test requirement

Remark

1

Standard charging mode At room temperature, the product is charged at a constant current of 1C. When the product voltage reaches the charging limit voltage of 16V, the product is charged at constant voltage until the charging current is less than 250mA.

/

 /

2

Standard discharge mode At room temperature, the discharge will be stopped when the product voltage reaches the discharge limit voltage of 9V.

/

 /

3

Rated capacitance

1. The product is charged according to the standard charging method.

The product capacity shall be no less than 60000F

 /
2. Stay 10min
3. The product discharges according to the standard discharge mode.

4

Internal resistance

Ac internal resistance tester tests, precision: 0.01 m Ω

≦5mΩ

 /

5

Discharge of high temperature

1. The product is charged according to the standard charging method.

Discharge capacity should ≥ 95% rated capacity, product appearance without deformation, no burst.

 /
2. Put the product into the incubator of 60±2℃ for 2H.
3. Discharge the product according to the standard discharge mode, recording discharge capacity.
4. After the discharge, the product will be taken out under normal temperature for 2 hours, and then visual appearance.

6

Low-temperature discharge

1. The product is charged according to the standard charging method.

discharge capacity≧70% no change on rated capacity, cap appearance, no burst

 /
2. Put the product into the incubator of -30±2℃ for 2H.
3. Discharge the product according to the standard discharge, recording discharge capacity.
4. After the discharge, the product will be taken out under normal temperature for 2 hours, and then visual appearance.

7

Cycle life

1. The product is charged according to the standard charging method.

No less than 20,000 cycles

 /
2. Stay 10min.
3. The product discharges according to the standard discharge mode.
4. Charge and discharge according to the above charging and discharging method for 20,000 cycles, until the discharge capacity is less than 80% of the initial capacity, the cycle is stopped.

Outline drawing

 

sp1

Circuit schematic diagram

sp3

Attention

1. The charging current shall not exceed the maximum charging current of this specification. Charging with a current value higher than the recommended value may cause problems in charging and discharging performance, mechanical performance, safety performance, etc. of the capacitor, resulting in heating or leakage.
2. The charging voltage shall not be higher than the rated voltage of 16V specified in this specification.
The charging voltage is higher than the rated voltage value, which may cause problems in the charging and discharging performance, mechanical performance and safety performance of the capacitor, resulting in heat or leakage.
3. The product must be charged at -30~60℃.
4. If the positive and negative poles of the module are connected correctly, reverse charging is strictly prohibited.
5. The discharge current shall not exceed the maximum discharge current specified in the specification.
6. The product must be discharged at -30~60℃.
7. Product voltage is lower than 9V, please do not force discharge;Full charge before use.


Product detail pictures:

Professional China  dry type capacitor - New developed Hybrid Supercapacitor Battery – CRE detail pictures

Professional China  dry type capacitor - New developed Hybrid Supercapacitor Battery – CRE detail pictures


Related Product Guide:

We emphasize advancement and introduce new products and solutions into the market each year for Professional China dry type capacitor - New developed Hybrid Supercapacitor Battery – CRE , The product will supply to all over the world, such as: Iceland, Ukraine, Egypt, We will initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
  • Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Dora from Mauritania - 2017.12.19 11:10
    We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
    5 Stars By Gwendolyn from Mauritius - 2018.11.04 10:32

    Send your message to us:

    Write your message here and send it to us

    Send your message to us: