OEM Supply Metallized Pp Film Capacitor - High-energy density power capacitors in high power converters – CRE
OEM Supply Metallized Pp Film Capacitor - High-energy density power capacitors in high power converters – CRE Detail:
DKMJ-S series
Metalized polypropylene capacitors, dry solution, for DC filters applications. Due to the high energy density, high rated voltage, and high ripple current, they can easily replace the electrolytic capacitors without additional series connections.
Technical data
Operating temperature range | Max.Operating temperature.,Top,max: + 70℃Upper category temperature: +60℃Lower category temperature: -40℃ | |
capacitance range |
100μF~20000μF |
|
Un/ Rated voltage Un |
600V.DC~4000V.DC |
|
Cap.tol |
±5%(J);±10%(K) |
|
Withstand voltage |
Vt-t |
1.5Un DC/60S |
Vt-c |
1000+2×Un/√2 (V.AC) 60S(min 3000 V.AC) |
|
Over Voltage |
1.1Un(30% of on-load-dur.) |
|
1.15Un(30min/day) |
||
1.2Un(5min/day) |
||
1.3Un(1min/day) |
||
1.5Un(100ms every time,1000times during the lifetime) |
||
Dissipation factor |
tgδ≤0.003 f=100Hz |
|
tgδ0≤0.0002 |
||
ESL |
<150 nH |
|
Flame retardation |
UL94V-0 |
|
Maximum altitude |
2000m |
|
When the altitude is above 2000m to below 5000m, it is necessary to consider the use of a reduced amount.(for each increase of 1000m, the voltage and current will be reduced by 10%)
|
||
Life expectancy |
100000h(Un; Θhotspot ≤70 °C ) |
|
Reference standard |
IEC 61071 ;IEC 61881; |
Specification table
Voltage | Un 800V.DC Us 1200V Ur 200V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
4000 | 340 | 125 | 190 | 5 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
8000 | 340 | 125 | 350 | 4 | 32.0 | 180 | 0.72 | 0.6 | 31.2 |
6000 | 420 | 125 | 245 | 5 | 30.0 | 150 | 0.95 | 0.7 | 26.4 |
10000 | 420 | 125 | 360 | 4 | 40.0 | 200 | 0.72 | 0.5 | 39.2 |
12000 | 420 | 235 | 245 | 4 | 48.0 | 250 | 0.9 | 0.3 | 49.6 |
20000 | 420 | 235 | 360 | 3 | 60.0 | 300 | 0.6 | 0.3 | 73.6 |
Voltage | Un 1200V.DC Us 1800V Ur 300V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2500 | 340 | 125 | 190 | 8 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
3300 | 340 | 125 | 245 | 8 | 26.4 | 150 | 0.95 | 0.7 | 22.4 |
5000 | 420 | 125 | 300 | 7 | 35.0 | 180 | 0.8 | 0.6 | 32.8 |
7500 | 420 | 125 | 430 | 5.5 | 41.3 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 190 | 8 | 40.0 | 200 | 1.1 | 0.3 | 32.8 |
10000 | 340 | 235 | 350 | 6 | 60.0 | 250 | 0.8 | 0.3 | 58.4 |
5000 | 420 | 235 | 175 | 8 | 40.0 | 200 | 1 | 0.4 | 36 |
7500 | 420 | 235 | 245 | 7 | 52.5 | 250 | 0.9 | 0.3 | 49.6 |
10000 | 420 | 235 | 300 | 7 | 70.0 | 250 | 0.8 | 0.3 | 61.6 |
15000 | 420 | 235 | 430 | 5 | 75.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 1500V.DC Us 2250V Ur 450V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1200 | 340 | 125 | 190 | 10 | 12.0 | 120 | 1.1 | 0.9 | 17.6 |
3000 | 340 | 125 | 420 | 8 | 24.0 | 180 | 0.66 | 0.7 | 37.6 |
2000 | 420 | 125 | 245 | 10 | 20.0 | 150 | 0.95 | 0.7 | 26.4 |
4000 | 420 | 125 | 430 | 8 | 32.0 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 350 | 8 | 40.0 | 250 | 0.8 | 0.3 | 58.4 |
4000 | 420 | 235 | 245 | 10 | 40.0 | 250 | 0.9 | 0.3 | 49.6 |
8000 | 420 | 235 | 430 | 8 | 64.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 2000V.DC Us 3000V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1000 | 340 | 125 | 245 | 12 | 12.0 | 150 | 0.95 | 0.7 | 22.4 |
1500 | 340 | 125 | 350 | 10 | 15.0 | 180 | 0.72 | 0.6 | 31.2 |
2000 | 420 | 125 | 360 | 10 | 20.0 | 200 | 0.72 | 0.5 | 39.2 |
2400 | 420 | 125 | 430 | 9 | 21.6 | 200 | 0.66 | 0.6 | 44.8 |
3200 | 340 | 235 | 350 | 10 | 32.0 | 250 | 0.8 | 0.3 | 46.4 |
4000 | 420 | 235 | 360 | 10 | 40.0 | 280 | 0.7 | 0.3 | 58.4 |
4800 | 420 | 235 | 430 | 9 | 43.2 | 300 | 0.6 | 0.3 | 67.2 |
Voltage | Un 2200V.DC Us 3300V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
2000 | 420 | 235 | 245 | 12 | 24 | 150 | 0.9 | 0.740740741 | 40 |
2750 | 420 | 235 | 300 | 10 | 27.5 | 200 | 0.8 | 0.46875 | 49.6 |
3500 | 420 | 235 | 360 | 10 | 35 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 3000V.DC Us 4500V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
1050 | 420 | 235 | 245 | 20 | 21 | 150 | 0.9 | 0.740740741 | 40 |
1400 | 420 | 235 | 300 | 15 | 21 | 200 | 0.8 | 0.46875 | 49.6 |
1800 | 420 | 235 | 360 | 15 | 27 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 4000V.DC Us 6000V Ur 1000V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
600 | 420 | 235 | 245 | 20 | 12 | 150 | 0.9 | 0.740740741 | 40 |
800 | 420 | 235 | 300 | 20 | 16 | 200 | 0.8 | 0.46875 | 49.6 |
1000 | 420 | 235 | 360 | 20 | 20 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 2800V.DC Us 4200V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1000 | 560 | 190 | 310 | 20 | 2×20 | 2×350 | 1 | 0.2 | 60 |
Voltage | Un 3200V.DC Us 4800V Ur 900V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1200 | 340 | 175 | 950 | 15 | 2×18 | 2×200 | 1.0 | 0.5 | 95 |
Product detail pictures:
Related Product Guide:
We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for OEM Supply Metallized Pp Film Capacitor - High-energy density power capacitors in high power converters – CRE , The product will supply to all over the world, such as: Moldova, Jamaica, Vietnam, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Clementine from Vancouver - 2017.10.27 12:12
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Rae from Palestine - 2018.05.15 10:52
Send your message to us:
Write your message here and send it to us