New Fashion Design for Cylindrical Aluminium Case Film Capacitor - High-energy density power capacitors in high power converters – CRE
New Fashion Design for Cylindrical Aluminium Case Film Capacitor - High-energy density power capacitors in high power converters – CRE Detail:
DKMJ-S series
Metalized polypropylene capacitors, dry solution, for DC filters applications. Due to the high energy density, high rated voltage, and high ripple current, they can easily replace the electrolytic capacitors without additional series connections.
Technical data
Operating temperature range | Max.Operating temperature.,Top,max: + 70℃Upper category temperature: +60℃Lower category temperature: -40℃ | |
capacitance range |
100μF~20000μF |
|
Un/ Rated voltage Un |
600V.DC~4000V.DC |
|
Cap.tol |
±5%(J);±10%(K) |
|
Withstand voltage |
Vt-t |
1.5Un DC/60S |
Vt-c |
1000+2×Un/√2 (V.AC) 60S(min 3000 V.AC) |
|
Over Voltage |
1.1Un(30% of on-load-dur.) |
|
1.15Un(30min/day) |
||
1.2Un(5min/day) |
||
1.3Un(1min/day) |
||
1.5Un(100ms every time,1000times during the lifetime) |
||
Dissipation factor |
tgδ≤0.003 f=100Hz |
|
tgδ0≤0.0002 |
||
ESL |
<150 nH |
|
Flame retardation |
UL94V-0 |
|
Maximum altitude |
2000m |
|
When the altitude is above 2000m to below 5000m, it is necessary to consider the use of a reduced amount.(for each increase of 1000m, the voltage and current will be reduced by 10%)
|
||
Life expectancy |
100000h(Un; Θhotspot ≤70 °C ) |
|
Reference standard |
IEC 61071 ;IEC 61881; |
Specification table
Voltage | Un 800V.DC Us 1200V Ur 200V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
4000 | 340 | 125 | 190 | 5 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
8000 | 340 | 125 | 350 | 4 | 32.0 | 180 | 0.72 | 0.6 | 31.2 |
6000 | 420 | 125 | 245 | 5 | 30.0 | 150 | 0.95 | 0.7 | 26.4 |
10000 | 420 | 125 | 360 | 4 | 40.0 | 200 | 0.72 | 0.5 | 39.2 |
12000 | 420 | 235 | 245 | 4 | 48.0 | 250 | 0.9 | 0.3 | 49.6 |
20000 | 420 | 235 | 360 | 3 | 60.0 | 300 | 0.6 | 0.3 | 73.6 |
Voltage | Un 1200V.DC Us 1800V Ur 300V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2500 | 340 | 125 | 190 | 8 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
3300 | 340 | 125 | 245 | 8 | 26.4 | 150 | 0.95 | 0.7 | 22.4 |
5000 | 420 | 125 | 300 | 7 | 35.0 | 180 | 0.8 | 0.6 | 32.8 |
7500 | 420 | 125 | 430 | 5.5 | 41.3 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 190 | 8 | 40.0 | 200 | 1.1 | 0.3 | 32.8 |
10000 | 340 | 235 | 350 | 6 | 60.0 | 250 | 0.8 | 0.3 | 58.4 |
5000 | 420 | 235 | 175 | 8 | 40.0 | 200 | 1 | 0.4 | 36 |
7500 | 420 | 235 | 245 | 7 | 52.5 | 250 | 0.9 | 0.3 | 49.6 |
10000 | 420 | 235 | 300 | 7 | 70.0 | 250 | 0.8 | 0.3 | 61.6 |
15000 | 420 | 235 | 430 | 5 | 75.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 1500V.DC Us 2250V Ur 450V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1200 | 340 | 125 | 190 | 10 | 12.0 | 120 | 1.1 | 0.9 | 17.6 |
3000 | 340 | 125 | 420 | 8 | 24.0 | 180 | 0.66 | 0.7 | 37.6 |
2000 | 420 | 125 | 245 | 10 | 20.0 | 150 | 0.95 | 0.7 | 26.4 |
4000 | 420 | 125 | 430 | 8 | 32.0 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 350 | 8 | 40.0 | 250 | 0.8 | 0.3 | 58.4 |
4000 | 420 | 235 | 245 | 10 | 40.0 | 250 | 0.9 | 0.3 | 49.6 |
8000 | 420 | 235 | 430 | 8 | 64.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 2000V.DC Us 3000V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1000 | 340 | 125 | 245 | 12 | 12.0 | 150 | 0.95 | 0.7 | 22.4 |
1500 | 340 | 125 | 350 | 10 | 15.0 | 180 | 0.72 | 0.6 | 31.2 |
2000 | 420 | 125 | 360 | 10 | 20.0 | 200 | 0.72 | 0.5 | 39.2 |
2400 | 420 | 125 | 430 | 9 | 21.6 | 200 | 0.66 | 0.6 | 44.8 |
3200 | 340 | 235 | 350 | 10 | 32.0 | 250 | 0.8 | 0.3 | 46.4 |
4000 | 420 | 235 | 360 | 10 | 40.0 | 280 | 0.7 | 0.3 | 58.4 |
4800 | 420 | 235 | 430 | 9 | 43.2 | 300 | 0.6 | 0.3 | 67.2 |
Voltage | Un 2200V.DC Us 3300V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
2000 | 420 | 235 | 245 | 12 | 24 | 150 | 0.9 | 0.740740741 | 40 |
2750 | 420 | 235 | 300 | 10 | 27.5 | 200 | 0.8 | 0.46875 | 49.6 |
3500 | 420 | 235 | 360 | 10 | 35 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 3000V.DC Us 4500V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
1050 | 420 | 235 | 245 | 20 | 21 | 150 | 0.9 | 0.740740741 | 40 |
1400 | 420 | 235 | 300 | 15 | 21 | 200 | 0.8 | 0.46875 | 49.6 |
1800 | 420 | 235 | 360 | 15 | 27 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 4000V.DC Us 6000V Ur 1000V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
600 | 420 | 235 | 245 | 20 | 12 | 150 | 0.9 | 0.740740741 | 40 |
800 | 420 | 235 | 300 | 20 | 16 | 200 | 0.8 | 0.46875 | 49.6 |
1000 | 420 | 235 | 360 | 20 | 20 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 2800V.DC Us 4200V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1000 | 560 | 190 | 310 | 20 | 2×20 | 2×350 | 1 | 0.2 | 60 |
Voltage | Un 3200V.DC Us 4800V Ur 900V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1200 | 340 | 175 | 950 | 15 | 2×18 | 2×200 | 1.0 | 0.5 | 95 |
Product detail pictures:
Related Product Guide:
We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for New Fashion Design for Cylindrical Aluminium Case Film Capacitor - High-energy density power capacitors in high power converters – CRE , The product will supply to all over the world, such as: Saudi Arabia, Guyana, Jordan, We solution have passed through the national skilled certification and been well received in our key industry. Our specialist engineering team will often be ready to serve you for consultation and feedback. We are able to also provide you with no cost samples to meet your needs. Best efforts will be produced to offer you the very best service and solutions. For anyone who is considering our business and solutions, please speak to us by sending us emails or get in touch with us right away. As a way to know our products and enterprise. lot more, you'll be able to come to our factory to find out it. We will constantly welcome guests from around the globe to our firm. o build enterprise. elations with us. Please really feel absolutely free to make contact with us for small business and we believe we will share the top trading practical experience with all our merchants.
By Federico Michael Di Marco from Tunisia - 2017.08.15 12:36
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Christina from Mongolia - 2017.03.28 12:22
Send your message to us:
Write your message here and send it to us