High Performance Capacitors In Automotive Applications - High power capacitor for power electronics – CRE
High Performance Capacitors In Automotive Applications - High power capacitor for power electronics – CRE Detail:
DKMJ-S Specification
CRE has been a world leader in high-performance film capacitor technology design for 10 years. We produce dry-wound capacitors, from 100VDC to 4kVDC. A key feature of CRE High Power is Controlled Self-Healing technology. This enables the capacitors to continue to function without catastrophic failure by effectively insulating any microscopic conduction sites within the dielectric.
While power film capacitors remain functional throughout their operating life, the initial capacitance value will decrease at a rate dependent upon the applied voltage and hot spot temperature. Our standard designs provide < (2-5)% capacitance loss over 100,000 hours lifetime at nominal voltage and a 70ºC hot spot temperature, while application specific designs can be provided on request. Various series of CRE High Power Capacitors are available for DC filtering, Protection, Pulse Discharge, Tuning, AC filtering and Storage applications.
Technical data
Rated capacitance |
CN |
1880μF±10% |
Rated voltage |
UN |
2150V.DC |
Non-recurrent surge voltage |
Us |
3225V |
Maximum current |
Imax |
240A |
Maximum peak current |
Î |
28.2KA |
Maximum surge current |
Is |
84.6KA |
Series resistance |
Rs |
≤0.35mΩ |
Tangent of the loss |
tanδ |
0.002 (100Hz) |
Tangent of the loss angle |
tanδ0 |
0.0002 |
Self dischargetime const. |
C × Ris |
10000S(100VDC 60S) |
Self inductance |
Le |
≤29nH |
Thermal resistance |
Rth |
0.33K/W |
Lowest operating temperature |
Èmin |
-40°C |
Maximum operating temperature |
Èmax |
85C |
Storage temperature |
Èstorage |
-40~85°C |
Service life |
at Èhotspot |
100000 h(≤70 °C) |
Failure quota |
100Fit |
|
Test data | ||
Voltage test between terminals |
Vtt |
3225V.DC/10S |
A.C. voltage test terminal/container |
Vt-c |
7000V.AC/50Hz 10S |
Operating altitude |
2000m(max) |
|
Maximal torque |
25Nm(max) |
|
Weight |
≈25kg |
DKMJ-S Selection table
Voltage | Un 800V.DC Us 1200V Ur 200V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
4000 | 340 | 125 | 190 | 5 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
8000 | 340 | 125 | 350 | 4 | 32.0 | 180 | 0.72 | 0.6 | 31.2 |
6000 | 420 | 125 | 245 | 5 | 30.0 | 150 | 0.95 | 0.7 | 26.4 |
10000 | 420 | 125 | 360 | 4 | 40.0 | 200 | 0.72 | 0.5 | 39.2 |
12000 | 420 | 235 | 245 | 4 | 48.0 | 250 | 0.9 | 0.3 | 49.6 |
20000 | 420 | 235 | 360 | 3 | 60.0 | 300 | 0.6 | 0.3 | 73.6 |
Voltage | Un 1200V.DC Us 1800V Ur 300V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2500 | 340 | 125 | 190 | 8 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
3300 | 340 | 125 | 245 | 8 | 26.4 | 150 | 0.95 | 0.7 | 22.4 |
5000 | 420 | 125 | 300 | 7 | 35.0 | 180 | 0.8 | 0.6 | 32.8 |
7500 | 420 | 125 | 430 | 5.5 | 41.3 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 190 | 8 | 40.0 | 200 | 1.1 | 0.3 | 32.8 |
10000 | 340 | 235 | 350 | 6 | 60.0 | 250 | 0.8 | 0.3 | 58.4 |
5000 | 420 | 235 | 175 | 8 | 40.0 | 200 | 1 | 0.4 | 36 |
7500 | 420 | 235 | 245 | 7 | 52.5 | 250 | 0.9 | 0.3 | 49.6 |
10000 | 420 | 235 | 300 | 7 | 70.0 | 250 | 0.8 | 0.3 | 61.6 |
15000 | 420 | 235 | 430 | 5 | 75.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 1500V.DC Us 2250V Ur 450V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1200 | 340 | 125 | 190 | 10 | 12.0 | 120 | 1.1 | 0.9 | 17.6 |
3000 | 340 | 125 | 420 | 8 | 24.0 | 180 | 0.66 | 0.7 | 37.6 |
2000 | 420 | 125 | 245 | 10 | 20.0 | 150 | 0.95 | 0.7 | 26.4 |
4000 | 420 | 125 | 430 | 8 | 32.0 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 350 | 8 | 40.0 | 250 | 0.8 | 0.3 | 58.4 |
4000 | 420 | 235 | 245 | 10 | 40.0 | 250 | 0.9 | 0.3 | 49.6 |
8000 | 420 | 235 | 430 | 8 | 64.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 2000V.DC Us 3000V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1000 | 340 | 125 | 245 | 12 | 12.0 | 150 | 0.95 | 0.7 | 22.4 |
1500 | 340 | 125 | 350 | 10 | 15.0 | 180 | 0.72 | 0.6 | 31.2 |
2000 | 420 | 125 | 360 | 10 | 20.0 | 200 | 0.72 | 0.5 | 39.2 |
2400 | 420 | 125 | 430 | 9 | 21.6 | 200 | 0.66 | 0.6 | 44.8 |
3200 | 340 | 235 | 350 | 10 | 32.0 | 250 | 0.8 | 0.3 | 46.4 |
4000 | 420 | 235 | 360 | 10 | 40.0 | 280 | 0.7 | 0.3 | 58.4 |
4800 | 420 | 235 | 430 | 9 | 43.2 | 300 | 0.6 | 0.3 | 67.2 |
Voltage | Un 2200V.DC Us 3300V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
2000 | 420 | 235 | 245 | 12 | 24 | 150 | 0.9 | 0.740740741 | 40 |
2750 | 420 | 235 | 300 | 10 | 27.5 | 200 | 0.8 | 0.46875 | 49.6 |
3500 | 420 | 235 | 360 | 10 | 35 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 3000V.DC Us 4500V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
1050 | 420 | 235 | 245 | 20 | 21 | 150 | 0.9 | 0.740740741 | 40 |
1400 | 420 | 235 | 300 | 15 | 21 | 200 | 0.8 | 0.46875 | 49.6 |
1800 | 420 | 235 | 360 | 15 | 27 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 4000V.DC Us 6000V Ur 1000V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
600 | 420 | 235 | 245 | 20 | 12 | 150 | 0.9 | 0.740740741 | 40 |
800 | 420 | 235 | 300 | 20 | 16 | 200 | 0.8 | 0.46875 | 49.6 |
1000 | 420 | 235 | 360 | 20 | 20 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 2800V.DC Us 4200V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1000 | 560 | 190 | 310 | 20 | 2×20 | 2×350 | 1 | 0.2 | 60 |
Voltage | Un 3200V.DC Us 4800V Ur 900V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1200 | 340 | 175 | 950 | 15 | 2×18 | 2×200 | 1.0 | 0.5 | 95 |
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for High Performance Capacitors In Automotive Applications - High power capacitor for power electronics – CRE , The product will supply to all over the world, such as: Hanover, Niger, United Arab Emirates, Taking the core concept of "to be the Responsible". We will redound up on society for high quality products and good service. We will initiative to participate in international competition to be a first- class manufacturer of this product in the world.
By Jerry from Lisbon - 2018.06.30 17:29
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Edith from Jakarta - 2018.12.10 19:03