Good User Reputation for Low Inductance Capacitors - New AC filter capacitor for modern converter and UPS application – CRE
Good User Reputation for Low Inductance Capacitors - New AC filter capacitor for modern converter and UPS application – CRE Detail:
Technical data
Operating temperature range | Max.Operating temperature.,Top,max: +85℃Upper category temperature:+70℃Lower category temperature:-40℃ | ||
capacitance range | Single phase | 20UF~500μF | |
three-phase |
3×40UF~3×200μF |
||
Un/ Rated voltage Un |
330V.AC/50Hz~1140V.AC/50Hz |
||
Cap.tol |
±5%(J) ; |
||
Withstand voltage |
Vt-t |
2.15Un /10S |
|
Vt-c |
1000+2×Un V.AC 60S(min3000V.AC) |
||
Over Voltage |
1.1Un(30% of on-load-dur.) |
||
1.15Un(30min/day) |
|||
1.2Un(5min/day) |
|||
1.3Un(1min/day) |
|||
1.5Un(100ms every time,1000times during the lifetime) |
|||
Dissipation factor |
tgδ≤0.002 f=100Hz |
||
tgδ0≤0.0002 | |||
Insulation resistance | RS*C≥10000S(at20℃ 100V.DC) | ||
Flame retardation |
UL94V-0 |
||
Maximum aititude |
2000m |
||
When the altitude is above 2000m to below 5000m, it is necessary to consider the use of reduced amount.(for each increase of 1000m, the voltage and current will be reduced by 10%)
|
|||
Life expectancy |
100000h(Un; Θhotspot≤55 °C) |
||
Reference standard |
IEC61071;IEC 60831; |
Feature
1. Aluminum round housing package, Sealed with resin;
2. Copper nut / screw leads, insulated plastic cover positioning,easy installation ;
3. Large capacity, small size;
4. Resistance to high voltage, with self-healing;
5. High ripple current, high dv / dt withstand capability.
Application
1. Widely used in power electronic equipment used for the AC filter.
2. In the high-power UPS, switching power supply, inverter and other equipment for the AC filter, harmonics and improve power factor control.
Typical circuit
Life expectancy
Outline drawing of single phase
ΦD(mm) |
P(mm) |
H1(mm) |
S |
F |
M |
76 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
86 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
96 |
45 |
20 |
M12×16 |
M6×10 |
M8×20 |
116 |
50 |
22 |
M12×16 |
M6×10 |
M8×20 |
136 |
50 |
30 |
M16×25 |
M6×10 |
M8×20 |
Outline drawing of three- phase
ΦD(mm) |
H1(mm) |
S |
F |
M |
D1 |
P |
116 |
40 |
M12×16 |
M6×10 |
M8×20 |
50 |
43.5 |
136 |
30 |
M16×25 |
M6×10 |
M8×20 |
60 |
52 |
Voltage | Un=330V.AC Us=1200V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
80 | 76 | 80 | 40 | 80 | 6.4 | 19.2 | 30 | 4 | 4.2 | 32 | 0.5 |
120 | 86 | 80 | 40 | 70 | 8.4 | 25.2 | 40 | 2.8 | 3.3 | 32 | 0.7 |
150 | 96 | 80 | 45 | 70 | 10.5 | 31.5 | 50 | 3.5 | 1.7 | 45 | 0.75 |
170 | 76 | 130 | 50 | 60 | 10.2 | 30.6 | 60 | 3.2 | 1.3 | 32 | 0.75 |
230 | 86 | 130 | 50 | 60 | 13.8 | 41.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
300 | 96 | 130 | 50 | 50 | 15.0 | 45.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
420 | 116 | 130 | 60 | 50 | 21.0 | 63.0 | 80 | 1.9 | 1.2 | 50 | 1.6 |
Voltage | Un=450V.AC Us=1520V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
50 | 76 | 80 | 40 | 90 | 4.5 | 13.5 | 30 | 4 | 4.2 | 32 | 0.5 |
65 | 86 | 80 | 50 | 80 | 5.2 | 15.6 | 40 | 2.8 | 3.3 | 32 | 0.7 |
80 | 96 | 80 | 45 | 80 | 6.4 | 19.2 | 50 | 3.5 | 1.7 | 45 | 0.75 |
100 | 76 | 130 | 50 | 70 | 7.0 | 21.0 | 60 | 3.2 | 1.3 | 32 | 0.75 |
130 | 86 | 130 | 45 | 60 | 7.8 | 23.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
160 | 96 | 130 | 50 | 50 | 8.0 | 24.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
250 | 116 | 130 | 60 | 50 | 12.5 | 37.5 | 80 | 1.9 | 1.2 | 50 | 1.6 |
Voltage | Un=690V.AC Us=2100V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
40 | 76 | 130 | 50 | 100 | 4.0 | 12.0 | 30 | 2.8 | 6.0 | 32 | 0.75 |
50 | 76 | 150 | 45 | 90 | 4.5 | 13.5 | 35 | 2.4 | 5.1 | 32 | 0.85 |
60 | 86 | 130 | 45 | 80 | 4.8 | 14.4 | 40 | 2.2 | 4.3 | 32 | 1.1 |
65 | 86 | 150 | 50 | 80 | 5.2 | 15.6 | 45 | 1.8 | 4.1 | 32 | 1.2 |
75 | 96 | 130 | 50 | 80 | 6.0 | 18.0 | 50 | 1.5 | 4.0 | 45 | 1.2 |
80 | 96 | 150 | 55 | 75 | 6.0 | 18.0 | 60 | 1.2 | 3.5 | 45 | 1.3 |
110 | 116 | 130 | 60 | 70 | 7.7 | 23.1 | 65 | 0.8 | 4.4 | 50 | 1.6 |
120 | 116 | 150 | 65 | 50 | 6.0 | 18.0 | 75 | 0.6 | 4.4 | 50 | 1.8 |
Voltage | Un=850V.AC Us=2850V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
25 | 76 | 130 | 50 | 110 | 2.8 | 8.3 | 35 | 1.5 | 8.2 | 32 | 0.75 |
30 | 76 | 150 | 60 | 100 | 3.0 | 9.0 | 40 | 1.2 | 7.8 | 32 | 0.85 |
32 | 86 | 130 | 45 | 100 | 3.2 | 9.6 | 50 | 1.15 | 5.2 | 32 | 1.1 |
45 | 86 | 150 | 50 | 90 | 4.1 | 12.2 | 50 | 1.05 | 5.7 | 32 | 1.2 |
40 | 96 | 130 | 50 | 90 | 3.6 | 10.8 | 50 | 1 | 6.0 | 45 | 1.2 |
60 | 96 | 150 | 60 | 85 | 5.1 | 15.3 | 60 | 0.9 | 4.6 | 45 | 1.3 |
60 | 116 | 130 | 60 | 80 | 4.8 | 14.4 | 65 | 0.85 | 4.2 | 50 | 1.6 |
90 | 116 | 150 | 65 | 75 | 6.8 | 20.3 | 75 | 0.8 | 3.3 | 50 | 1.8 |
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A) | ESR(mΩ) | Rth(K/W) | P(mm) | weight(Kg) | |
Voltage | Un=400V.AC Us=1200V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
3× | 110 | 116 | 130 | 100 | 60 | 6.6 | 19.8 | 3×50 | 3×0.78 | 4.5 | 43.5 | 1.6 |
3× | 145 | 116 | 180 | 110 | 50 | 7.3 | 21.8 | 3×60 | 3×0.72 | 3.8 | 43.5 | 2.4 |
3× | 175 | 116 | 210 | 120 | 50 | 8.8 | 26.3 | 3×75 | 3×0.67 | 3.5 | 43.5 | 2.7 |
3× | 200 | 136 | 230 | 125 | 40 | 8.0 | 24.0 | 3×85 | 3×0.6 | 2.1 | 52 | 4.2 |
Voltage | Un=500V.AC Us=1520V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
3× | 100 | 116 | 180 | 100 | 80 | 8.0 | 24.0 | 3×45 | 3×0.78 | 4.5 | 43.5 | 2.6 |
3× | 120 | 116 | 230 | 120 | 70 | 8.4 | 25.2 | 3×50 | 3×0.72 | 3.8 | 43.5 | 3 |
3× | 125 | 136 | 180 | 110 | 40 | 5.0 | 15.0 | 3×70 | 3×0.67 | 3.5 | 52 | 3.2 |
3× | 135 | 136 | 230 | 130 | 50 | 6.8 | 20.3 | 3×80 | 3×0.6 | 2.1 | 52 | 4.2 |
Voltage | Un=690V.AC Us=2100V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
3× | 49 | 116 | 230 | 120 | 70 | 3.4 | 10.3 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
3× | 55.7 | 136 | 230 | 130 | 90 | 5.0 | 15.0 | 3×56 | 3×0.4 | 2.1 | 52 | 4.2 |
Voltage | Un=850V.AC Us=2580V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
3× | 41.5 | 116 | 230 | 120 | 80 | 3.0 | 9.0 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
3× | 55.7 | 136 | 230 | 130 | 50 | 0.4 | 1.2 | 3×104 | 3×0.45 | 1.8 | 52 | 4.2 |
Product detail pictures:
Related Product Guide:
With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for Good User Reputation for Low Inductance Capacitors - New AC filter capacitor for modern converter and UPS application – CRE , The product will supply to all over the world, such as: Egypt, kazakhstan, Jamaica, Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We are able to also deliver you with cost-free samples to meet your specifications. Ideal efforts will probably be produced to provide you the most beneficial service and solutions. Should you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We'll constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. Please feel absolutely free to speak to us for organization. nd we believe we will share the best trading practical experience with all our merchants.
By Janet from Peru - 2017.01.11 17:15
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Penny from United States - 2017.10.23 10:29